LIMITED STOCK!
 

Rugby Posts Pair – Junior Galv/ 50mm

SKU RU756GL

$ 3,800.00 inc GST

Incl GST$3,304.35 Excl GST

The SE Rugby Posts Pair – Junior Galv/ 50mm is a set of rugby union goal posts sized for junior players. The 50 mm galvanised pipe can be assembled with the crossbar at the regulation 3 m height or set lower for younger teams, and the crossbar can be cut shorter for a smaller goal. Sold as a pair with ground sockets, made to order and freighted.

Made to order — lead times apply

SKU: RU756GL Categories: Brand:
Earn SD Dollars on this orderHow SD Dollars work
 

Description

Overview

Junior rugby does not need senior-weight steel, and it often does not need a full-height goal either. The Rugby Posts Pair – Junior Galv/ 50mm answers both. Made from galvanised 50 mm nominal bore pipe, it uses the smallest-diameter pipe in the SE rugby goal posts range and is the only set built to be assembled smaller than regulation.

At full height the regulation-width crossbar sits at 3 metres with a 2.9 metre post above it. For younger players the crossbar can be set lower, and it can be cut shorter if a narrower goal suits your field. A set of ground sockets is included.

Key benefits

  • Grows with your players: the crossbar can be set lower for younger age groups.
  • Crossbar can be cut shorter when a smaller goal is wanted.
  • Full regulation 3 m crossbar height is still there as players get older.
  • Galvanised finish that does not need repainting on a busy school field.
  • Ground sockets included so the goals can go in straight away.

Who it's for

Choose this set for primary and intermediate school fields, junior club grounds and anywhere players are still learning to kick at goal. Setting the bar lower gives small kickers a fair target, and cutting the crossbar keeps the goal in proportion on a shortened field.

Once players move into intermediate grades and need a standard goal, step up to the Rugby Posts Pair – Galv/ 65mm in the same galvanised finish, or its white powder-coated equivalent.

Care, safety and set-up

These posts are made to order, so manufacturing begins after you order, and delivery is by freight quoted to your address. Decide on crossbar height and width before installation, because cutting the crossbar cannot be undone.

Install the ground sockets first, then lower the assembled goals in. Check each season that the posts remain firmly seated. Covered by the store's 12-month guarantee.

Frequently asked questions

Can we lower the crossbar for our under-age teams?

Yes. The goals can be assembled at the regulation 3 m height or with the crossbar set lower for younger players.

Can the goal be made narrower?

Yes, the crossbar can be cut shorter if a smaller goal is required. Settle on a width first, since it cannot be lengthened again.

How do we order and get a freight price?

Add the pair to a quote and request a quote. The team will confirm the made-to-order process and freight to your school or club, and can point you to funding packages.

Is this suitable for senior matches?

No. It is a junior set on 50 mm pipe. Senior grounds should look at the Rugby Posts Pair – Senior Powder Coated 80mm.

Additional information

Weight 10 kg
Finish

Outer Diameter (mm

Size